Thermometry Lab Dataverse

Featured Dataverses

In order to use this feature you must have at least one published dataverse.

Publish Dataverse

Are you sure you want to publish your dataverse? Once you do so it must remain published.

Publish Dataverse

This dataverse cannot be published because the dataverse it is in has not been published.

Delete Dataverse

Are you sure you want to delete your dataverse? You cannot undelete this dataverse.

1 to 3 of 3 Results

Investigation of ITS-90 Inconsistencies in Overlap Region of the Water-indium, Water-tin, and Water-zinc Sub-ranges Apr 5, 2018 Trisna, Beni; Suherlan; Zaid, G, 2018, "Investigation of ITS-90 Inconsistencies in Overlap Region of the Water-indium, Water-tin, and Water-zinc Sub-ranges", https://hdl.handle.net/20.500.12690/RIN/6OSZUV, RIN Dataverse, V1 One of the significant uncertainties in Standard Platinum Resistance Thermometer (SPRT) calibration by fixedpoints method is Type I non-uniqueness (sub-range inconsistencies). Sub-ranges water-tin (W9) and water-indium (W10) lies in the water-zinc (W8) sub-range of the Internatio...
APMP.T-K3.4: Key comparison of realizations of the ITS-90 over the range -38.8344 °C to 419.527 °C Apr 5, 2018 Joung, W; Gam, K.S; Achmadi, A; Trisna, B.A, 2018, "APMP.T-K3.4: Key comparison of realizations of the ITS-90 over the range -38.8344 °C to 419.527 °C", https://hdl.handle.net/20.500.12690/RIN/X1SNY4, RIN Dataverse, V1 The APMP bilateral key comparison APMP.T-K3.4 was initiated on the request from RCM-LIPI (Indonesia) to link their national standards to the average reference values (ARVs) of the CCT-K3. Korea Research Institute of Standards and Science (KRISS, Republic of Korea) provided the li...
Fabrication and Determination of an Aluminium Fixed Point Cell as a Secondary Standard in Thermocouple Calibration Apr 5, 2018 Trisna, Beni; Suherlan; Achmadi, A; Larassati, D; Zaid, G, 2018, "Fabrication and Determination of an Aluminium Fixed Point Cell as a Secondary Standard in Thermocouple Calibration", https://hdl.handle.net/20.500.12690/RIN/RVTUP9, RIN Dataverse, V1 A new open-type aluminium (Al) fixed-point cell has been fabricated in Puslit Metrologi-LIPI. The cell was successfully characterized by direct comparison with a commercial Al cell. The cell plateau lasted for four hours with a flatness of 0.014 °C, measured as the difference bet...

Investigation of ITS-90 Inconsistencies in Overlap Region of the Water-indium, Water-tin, and Water-zinc Sub-ranges

Apr 5, 2018

Trisna, Beni; Suherlan; Zaid, G, 2018, "Investigation of ITS-90 Inconsistencies in Overlap Region of the Water-indium, Water-tin, and Water-zinc Sub-ranges", https://hdl.handle.net/20.500.12690/RIN/6OSZUV, RIN Dataverse, V1

One of the significant uncertainties in Standard Platinum Resistance Thermometer (SPRT) calibration by fixedpoints method is Type I non-uniqueness (sub-range inconsistencies). Sub-ranges water-tin (W9) and water-indium (W10) lies in the water-zinc (W8) sub-range of the Internatio...

APMP.T-K3.4: Key comparison of realizations of the ITS-90 over the range -38.8344 °C to 419.527 °C

Apr 5, 2018

Joung, W; Gam, K.S; Achmadi, A; Trisna, B.A, 2018, "APMP.T-K3.4: Key comparison of realizations of the ITS-90 over the range -38.8344 °C to 419.527 °C", https://hdl.handle.net/20.500.12690/RIN/X1SNY4, RIN Dataverse, V1

The APMP bilateral key comparison APMP.T-K3.4 was initiated on the request from RCM-LIPI (Indonesia) to link their national standards to the average reference values (ARVs) of the CCT-K3. Korea Research Institute of Standards and Science (KRISS, Republic of Korea) provided the li...

Fabrication and Determination of an Aluminium Fixed Point Cell as a Secondary Standard in Thermocouple Calibration

Apr 5, 2018

Trisna, Beni; Suherlan; Achmadi, A; Larassati, D; Zaid, G, 2018, "Fabrication and Determination of an Aluminium Fixed Point Cell as a Secondary Standard in Thermocouple Calibration", https://hdl.handle.net/20.500.12690/RIN/RVTUP9, RIN Dataverse, V1

A new open-type aluminium (Al) fixed-point cell has been fabricated in Puslit Metrologi-LIPI. The cell was successfully characterized by direct comparison with a commercial Al cell. The cell plateau lasted for four hours with a flatness of 0.014 °C, measured as the difference bet...

Add Data

Share Dataverse

Link Dataverse

Reset Modifications